|
Fireplaces
Gas Logs
How to calculate the vented gas log set to fit your fireplace, do the following:
- Measure the fireplace opening, width and hieght and depth to get the dimensions.
- Subtract 4 inches from your fireplace's front width to allow for the minimum of 2 inches of space that are needed between the side walls of the fireplace and the burner system equipment.
- If you are NOT adding a Pilot Kit (Natural Gas Units Only), this gives you a total of 4 inches that are needed to subtract from your fireplace's Front Width. The remaining total is the largest size vented gas log set that will fit correctly in your fireplace.
- If you are getting a Safety Pilot Kit (required in propane units), you must minus another 4 inches from your fireplace's front Width to compensate for the size of the Safety Pilot Kit. This gives you a total of 8" that are needed to subtract from your fireplace's front Width. The remaining total is the largest size vented gas log set that will fit properly in your fireplace.
- If you are getting an Automatic Pilot Kit (i.e. remote ready kits), you must subtract another 8 inches from your fireplace's front width measurement to compensate for the size of the Automatic Pilot Kit. This gives you a total of 12 inches that are needed to subtract from your fireplace's Front Width measurement. The remaining total is the largest size vented gas log set that will fit properly in your fireplace.
A few of our Fireplace Vendors
American Gas Logs
Fireplace Product Sections
Direct Vent Fireplaces
Electric Fireplaces
Gas Logs
Choosing Tile for your Fireplace
Prevenative Maintenance Program
FAQ
Need some inspiration? Visit our design center for ideas!
Visit our Award Winning Showroom for more examples
Click here for a list of
Product Specifications and
LEED information
Tile - Garage Doors - Fireplaces - Brick
Columbus - Delaware - Cincinnati - Ohio
|
